The servo encoder slip ring is an electrical slip ring that works for the servo encoder signal and servo motor power supply. The servo encoder slip ring can save many cables and installation works to transmit data and power. Suitable for all kinds of servo/stepper motors. Supplies usually use gold contacts to avoid external interference and internal interference.
Servo Encoder Slip Rings - BH Series
Available for Custom, Standard 1~4 Motor
GRAND does special treatment for internal shielding and wiring to make sure no packet loss and a low bit error rate.
Although GRAND offers modularized & standardized designs for various application solutions as an original slip ring manufacturer. To create your most suitable servo encoder slip ring connector, please feel free to contact us.
Feature
- Special internal shielding and wiring design
- Permanently lubricated bearing
- Gold to gold contacts
- Easy installation
Options
- No. of rings
- Current &voltage
- Inner, out diameter and length
- Operating speed
- Wire length
- Position of wire outlet
- Connector
- Housing material
Model Breakdown
Model | No. of Servo Motor | Max rings | ID(mm) | OD(mm) | |
BHG2578-22 | 1-2 | 22 | 25 | 78 |  |
BHG70155-12 | 1-2 | 12 | 70 | 155 | |
BHG3899-39 | 1-3 | 39 | 38 | 99 | |
BHG50120-30 | 1-3 | 30 | 50 | 120 | |
BHG1254-24 | 1-4 | 24 | 12 | 54 | |
BHT078-36 | 1-4 | 36 | -- | 78 | |
BHG60135-38 | 1-4 | 38 | 60 | 135 | |
BHG80180-33 | 1-4 | 33 | 80 | 180 | |
BHT085-51 | 1-4 | 51 | -- | 85 | |
